aboutsummaryrefslogtreecommitdiffhomepage
diff options
context:
space:
mode:
-rw-r--r--README.md59
1 files changed, 58 insertions, 1 deletions
diff --git a/README.md b/README.md
index 48f7659..a12f9e3 100644
--- a/README.md
+++ b/README.md
@@ -165,7 +165,64 @@ output to the same channel again.
### The `osc` backend
-TBD
+This backend will allow read and write access to the Open Sound Control protocol,
+spoken primarily by visual interface tools and hardware such as TouchOSC.
+
+#### Global configuration
+
+This backend does not take any global configuration.
+
+#### Instance configuration
+
+| Option | Example value | Default value | Description |
+|---------------|-----------------------|-----------------------|-----------------------|
+| `root` | `/my/osc/path` | none | An OSC path prefix to be prepended to all channels |
+| `bind` | `:: 8000` | none | The host and port to listen on |
+| `dest` | `10.11.12.13 8001` | none | Remote address to send OSC data to. Setting this enables the instance for output |
+
+Note that specifying an instance root speeds up matching, as packets not matching
+it are ignored early in processing.
+
+#### Channel specification
+
+A channel may be any valid OSC path, to which the instance root will be prepended if
+set. Multi-value controls (such as X-Y pads) are supported by appending `:n` to the path,
+where `n` is the parameter index, with the first (and default) one being `0`.
+
+Example mapping:
+```
+osc1./1/xy1:0 > osc2./1/fader1
+```
+
+Note that any multi-value channel that is to be output will need to be set up in the instance
+configuration (not yet implemented).
+
+#### Value ranges
+
+OSC allows controls to have individual value ranges and supports different parameter types.
+The following types are currently supported by the MIDImonster:
+
+* `i`: 32-bit signed integer
+* `f`: 32-bit IEEE floating point
+* `h`: 64-bit signed integer
+* `d`: 64-bit double precision floating point
+
+For each type, there is a default value range which will be assumed if the channel is not otherwise
+configured using the instance configuration. Values out of a channels range will be clipped.
+
+The default ranges are:
+
+* `i`: `0` to `255`
+* `f`: `0.0` to `1.0`
+* `h`: `0` to `1024`
+* `d`: `0.0` to `1.0`
+
+#### Known bugs / problems
+
+Output is not yet implemented for this backend.
+
+Channels which are to be output require individual configuration to set their types and limits,
+as do input channels presenting a custom value range.
## Building