### The `maweb` backend This backend connects directly with the integrated *MA Web Remote* of MA Lighting consoles and OnPC instances (GrandMA2 / GrandMA2 OnPC / GrandMA Dot2 / GrandMA Dot2 OnPC). It grants read-write access to the console's playback faders and buttons as well as write access to the command line buttons. To allow this backend to connect to the console, enter the console configuration (`Setup` key), select `Console`/`Global Settings` and set the `Remotes` option to `Login enabled`. Create an additional user that is able to log into the Web Remote using `Setup`/`Console`/`User & Profiles Setup`. #### Global configuration The `maweb` backend does not take any global configuration. #### Instance configuration | Option | Example value | Default value | Description | |---------------|-----------------------|-----------------------|---------------------------------------------------------------| | `host` | `10.23.42.21 80` | none | Host address (and optional port) of the MA Web Remote | | `user` | `midimonster` | none | User for the remote session (GrandMA2) | | `password` | `midimonster` | `midimonster` | Password for the remote session | #### Channel specification Currently, three types of channels can be assigned ##### Executors Executors are arranged in pages, with each page having 90 fader executors (numbered 1 through 90) and 90 button executors (numbered 101 through 190). Note that when creating a new show, only the first page is created and active. A fader executor consists of a fader, two buttons (`upper`, `lower`) above it and one `flash` button below it. These controls can be addressed like ``` mw1.page1.fader5 > mw1.page1.upper5 mw1.page3.lower3 > mw1.page2.flash2 ``` A button executor can likewise be mapped using the syntax ``` mw1.page2.button103 > mw1.page3.button101 ``` ##### Command line buttons Command line buttons will be pressed when the incoming event value is greater than `0.9` and released when it is less than that. They can be mapped using the syntax ``` mw1. ``` The following button names are recognized by the backend: | `SET` | `PREV` | `NEXT` | `CLEAR` | `FIXTURE_CHANNEL` | `FIXTURE_GROUP_PRESET` | `EXEC_CUE` | | `STORE_UPDATE`| `OOPS` | `ESC` | `OFF` | `ON` | `MA` | `STORE` | | `0` | `1` | `2` | `3` | `4` | `5` | `6` | | `7` | `8` | `9` | `PUNKT` | `PLUS` | `MINUS` | `THRU` | | `IF` | `AT` | `FULL` | `HIGH` | `ENTER` | `ASSIGN` | `LABEL` | | `COPY` | `TIME` | `PAGE` | `MACRO` | `DELETE` | `GOTO` | `GO_PLUS` | | `GO_MINUS` | `PAUSE` | `SELECT` | `FIXTURE` | `SEQU` | `CUE` | `PRESET` | | `EDIT` | `UPDATE` | `EXEC` | `GROUP` | `PROG_ONLY` | `SPECIAL_DIALOGUE` | `SOLO` | | `ODD` | `EVEN` | `WINGS` | `RESET` | `layerMode` | `featureSort` | `fixtureSort` | | `channelSort` | `hideName` | | | | | | Note that each Web Remote connection has it's own command line, as such commands entered using this backend will not affect the command line on the main console. To do that, you will need to use another backend to feed input to the MA, such as the ArtNet or MIDI backends. #### Known bugs / problems To properly encode the user password, this backend depends on a library providing cryptographic functions (`libssl` / `openssl`). Since this may be a problem on some platforms, the backend can be built with this requirement disabled, which also disables the possibility to set arbitrary passwords. The backend will always try to log in with the default password `midimonster` in this case. The user name is still configurable. This backend is currently in active development. It therefore has some limitations: * It outputs a lot of debug information * It currently is write-only, channel events are only sent to the MA, not generated by it * Fader executors (and their buttons) seem to work, I haven't tested button executors yet. * Command line events are sent, but I'm not sure they're being handled yet * I have so far only tested it with GradMA2 OnPC