### The `osc` backend This backend offers read and write access to the Open Sound Control protocol, spoken primarily by visual interface tools and hardware such as TouchOSC. #### Global configuration This backend does not take any global configuration. #### Instance configuration | Option | Example value | Default value | Description | |---------------|-----------------------|-----------------------|-----------------------| | `root` | `/my/osc/path` | none | An OSC path prefix to be prepended to all channels | | `bind` | `:: 8000` | none | The host and port to listen on | | `destination` | `10.11.12.13 8001` | none | Remote address to send OSC data to. Setting this enables the instance for output. The special value `learn` causes the MIDImonster to always reply to the address the last incoming packet came from. A different remote port for responses can be forced with the syntax `learn@` | Note that specifying an instance root speeds up matching, as packets not matching it are ignored early in processing. Channels that are to be output or require a value range different from the default ranges (see below) require special configuration, as their types and limits have to be set. This is done in the instance configuration using an assignment of the syntax ``` /local/osc/path = ... ``` The OSC path to be configured must only be the local part (omitting a configured instance root). **format** may be any sequence of valid OSC type characters. See below for a table of supported OSC types. For each component of the path, the minimum and maximum values must be given separated by spaces. Components may be accessed in the mapping section as detailed in the next section. An example configuration for transmission of an OSC message with 2 floating point components with a range between 0.0 and 2.0 (for example, an X-Y control), would look as follows: ``` /1/xy1 = ff 0.0 2.0 0.0 2.0 ``` #### Channel specification A channel may be any valid OSC path, to which the instance root will be prepended if set. Multi-value controls (such as X-Y pads) are supported by appending `:n` to the path, where `n` is the parameter index, with the first (and default) one being `0`. Example mapping: ``` osc1./1/xy1:0 > osc2./1/fader1 ``` Note that any channel that is to be output will need to be set up in the instance configuration. #### Supported types & value ranges OSC allows controls to have individual value ranges and supports different parameter types. The following types are currently supported by the MIDImonster: * **i**: 32-bit signed integer * **f**: 32-bit IEEE floating point * **h**: 64-bit signed integer * **d**: 64-bit double precision floating point For each type, there is a default value range which will be assumed if the channel is not otherwise configured using the instance configuration. Values out of a channels range will be clipped. The default ranges are: * **i**: `0` to `255` * **f**: `0.0` to `1.0` * **h**: `0` to `1024` * **d**: `0.0` to `1.0` #### Known bugs / problems Ping requests are not yet answered. There may be some problems using broadcast output and input.