diff options
| -rw-r--r-- | configs/i3msg.lua | 75 | ||||
| -rw-r--r-- | configs/latch.lua | 51 | ||||
| -rw-r--r-- | configs/returnbool.lua | 24 | ||||
| -rw-r--r-- | configs/returnjustone.lua | 23 |
4 files changed, 173 insertions, 0 deletions
diff --git a/configs/i3msg.lua b/configs/i3msg.lua new file mode 100644 index 0000000..e9704c5 --- /dev/null +++ b/configs/i3msg.lua @@ -0,0 +1,75 @@ +--Simple lua OS examples by Paul Hedderly +-- PREREQUISITES: +-- luarocks install luasocket # optional if you will use your own connectors (see below) +-- luarocks install luabitop # you don't need this for lua 5.3 +-- luarocks install luasec # you don't need this if you don't want to use SSL connections +-- luarocks install luamqtt + +-- Example - A lot of these will depend on other configs and will need to be localised +-- [lua i3msg] +-- script = confgs/i3msg.lua +-- default-handler = i3msg +-- +-- nanomap.{1..10} > i3msg.workspace.{1..10} -- Jump to i3 workspace +-- nanomap.10 > i3msg.muteall +-- nanomap.11 > i3msg.run.pasink +-- nanomap.12 > i3msg.showhide.retext +-- nanomap.13 > i3msg.showhide.paprefs +-- nanomap.14 > i3msg.showhide.pavucontrol +-- nanomap.15 > i3msg.showhide.keepassxc +-- nanomap.16 > i3msg.showhide.microsoft teams - insiders + +-- trackpad.gestureoo852 > i3msg.macro.volup -- see my trackpad.lua example +-- trackpad.gestureoo25> i3msg.macro.voldown + +function i3msg(v) -- Use a default function - then you can use any input channel name + + m=0.31 + M=0.99 + A = - M*m^2 / (M^2 - 2*m*M) + B = M*m^2 / (M^2 - 2*m*M) + C = math.log((M - m)^2 / m^2) + inchan=input_channel() + first=inchan:gsub("%..*","") + last=inchan:gsub('^.-%.',"") + + if (v==0) then return; end -- Here were do not care that the control was released + + if (inchan == "macro.myadminpass") then + os.execute("/home/user/bin/macroscripttotypemyadminpassword") + + elseif (first == "workspace") then + -- print("i3-msg workspace number "..last) + os.execute("i3-msg workspace number "..last) + + elseif (first=="showhide") then + os.execute("i3-msg '[instance=\""..last.."\"] scratchpad show;'") + + elseif (inchan=="macro.volup") then + os.execute("pactl set-sink-volume 0 +5%") + + elseif (inchan=="macro.voldown") then + os.execute("pactl set-sink-volume 0 -10%") + + elseif (first=="sinkvol") then + os.execute("pactl set-sink-volume "..last.." "..math.floor(100*(A+B*math.exp(C*v))).."%") + + elseif (first=="vol") then + os.execute("pactl set-sink-volume "..last.." "..v) + + elseif (first=="srcvol") then + os.execute("pactl set-source-volume "..last.." "..math.floor(100*(A+B*math.exp(C*v))).."%") + + elseif (first=="dsink") then + os.execute("pactl set-default-sink "..last) + + elseif (first=="dsrc") then + os.execute("pactl set-default-source "..last) + + elseif (first=="muteall") then + os.execute("~/bin/muteall") + + else + print("i3msg-notfound:"..first.." L:"..last.." v:"..v) + end +end diff --git a/configs/latch.lua b/configs/latch.lua new file mode 100644 index 0000000..569cae2 --- /dev/null +++ b/configs/latch.lua @@ -0,0 +1,51 @@ +-- Trackpad input by Paul Hedderly +-- Expects two inputs - one master and one slave +-- The first is to track a contolled input for example a +-- sound desk fader. +-- The slave is for a fader on a non-motorised surface... +-- The idea is that the slave is not forwarded to the +-- first/main output until it is close in value to the master +-- This is to avoid sudden jumps when using a secondary +-- non-motorised controller. +-- +-- Example config - here using a nanok as a slave to an X32 +-- +-- [midi x32] +-- read = X32Live +-- write = X32Live +-- +-- [midi nanoK] +-- read = nanoKEY +-- write = nanoKEY +-- +-- [lua latch] +-- script = latch.lua +-- default-handler = latch +-- +-- x32.ch0.cc1 > latch.0.master +-- nanoK.ch0.cc1 > latch.0.slave +-- latch.0.latched > x32.ch0.cc1 + +threshold=0.03 +saved={} + +function latch(v) + i=input_channel(); separator=i:find("%.") + channel=i:sub(0,separator-1) + control=i:sub(1+separator,-1) + + -- Setup the saved value if not yet seen + if saved[channel]==nil then + saved[channel]=v + end + + if control == "master" then + saved[channel]=v + elseif control == "slave" then + diff=math.abs(v-saved[channel]) + if diff < threshold then + saved[channel]=v + output(channel..".latched",v) + end + end +end diff --git a/configs/returnbool.lua b/configs/returnbool.lua new file mode 100644 index 0000000..50266d9 --- /dev/null +++ b/configs/returnbool.lua @@ -0,0 +1,24 @@ +-- ReturnOne by Paul Hedderly +-- Sometimes you just want an on or off - and it might be from anything >0 +-- For example I want to activate scenes in OBS from a Korg NanoPad2 +-- But I dont want to have to thump the pads to get a 1.0 output +-- +-- You could use this as: +-- [midi nanoP] +-- read = nanoPAD2 +-- write = nanoPAD2 +-- [lua trackpad] +-- script = trackpad.lua +-- default-handler = returnone +-- .. +-- nanoP.ch0.note{36..51} > returnone.one{1..16} -- To feed all the 16 pads to +-- returnone.outone1 > obs./obs/scene/1/preview +-- returnone.outone2 > obs./obs/scene/2/preview +-- etc +-- The output channel will be the same as the channel you feed prepended "out" + + +function returnbool(v) -- Use a default function - then you can use any input channel name + if v>0 then output("out"..input_channel(),1) end; + if v==0 then output("out"..input_channel(),0) end; +end diff --git a/configs/returnjustone.lua b/configs/returnjustone.lua new file mode 100644 index 0000000..c1b1632 --- /dev/null +++ b/configs/returnjustone.lua @@ -0,0 +1,23 @@ +-- ReturnOne by Paul Hedderly +-- Sometimes you just want just an on - and from any imput but 0 +-- For example I want to activate scenes in OBS from a Korg NanoPad2 +-- But I dont want to have to thump the pads to get a 1.0 output +-- +-- You could use this as: +-- [midi nanoP] +-- read = nanoPAD2 +-- write = nanoPAD2 +-- [lua trackpad] +-- script = trackpad.lua +-- default-handler = returnone +-- .. +-- nanoP.ch0.note{36..51} > returnone.one{1..16} -- To feed all the 16 pads to +-- returnone.outone1 > obs./obs/scene/1/preview +-- returnone.outone2 > obs./obs/scene/2/preview +-- etc +-- The output channel will be the same as the channel you feed prepended "out" + + +function returnjustone(v) -- Use a default function - then you can use any input channel name + if v>0 then output("out"..input_channel(),1) end; +end |